2017 Kawasaki Z900 and Z650 to replace Z800 and ER-6n
By NewsX Bureau
| Tuesday, October 11, 2016 - 23:33
New Delhi: Apart from unveiling the updated Ninja H2 and the next-gen Ninja 650, Kawasaki previewed two complete new models at the INTERMOT fair in Cologne, Germany. These upcoming models are the Kawasaki Z900 and the Z650, which will be officially revealed at the EICMA event next month in Milan, Italy. Once launched, the new Z900 could replace the existing Z800, while the Z650 will take the place of the ER-6n.
The 2017 Kawasaki Z900 is a big change over the existing Z800. It gets an all-new steel trellis frame and a new 948cc engine. The new 125PS motor has been derived from the bigger Kawasaki Z1000 that also contributes to the aggressive design lines of the upcoming Z900. The company has worked on the motor to make this bike more nimble and accessible with a reduced seat height to 794mm and an overall weight of 210kg (more than 20kg lighter).
The bike will offer a slightly aggressive riding posture and it will get Kawasaki's assist and slipper clutch for easier up-shifts and trouble-free down-shifts. The front inverted forks also get stepless rebound damping and pre-load adjustability whereas it currently comes with the rear monoshock only. Along with the new alloys, the dual 300mm front discs in combination with four-piston calipers from Nissin are also new. Moreover, the new Kawasaki Z900 will be offered with ABS as standard.
The parallel-twin powered 2017 Kawasaki Z650 will replace the existing ER6-n. The Z650 also gets a new trellis steel frame while the 650cc parallel-twin engine remains unchanged. However, the peak power output has been reduced by 3PS in order to make it Euro-4 compliant. The bike also gets assist & slipper clutch along with the ABS, while the brakes come from Tokico. Visual changes on the bike include a well-designed underbelly exhaust, restyled headlamp and dashboard, banana-shaped swingarm and side panels.